Settings
Network settings |
The Network settings feature enables you to indicate whether the network used when roaming (outside your home area) is selected automatically, manually or preferably.
n Note You can select a network other than your home network only if it has a valid roaming agreement with your home network.
Automatic |
Use this to set the phone to automatically search for and select one of the cellular networks available in your area.
The phone will default back to Automatic if it is switched off.
Manual |
If you want to select the desired network manually from a list of network. If the connection to the manually selected network is lost, the phone will sound an error tone and ask you to select a network again. The selected network must have a roaming agreement with your home network, that is, the operator whose SIM card is in your phone. The phone will let you select another network if the phone fails to access the selected network. If you switch off the phone, the phone will be reset to Automatic.
Preferred |
You can set a list of preferred networks the handset should attempt to register with first, before attempting to register to any other networks. This list is created from the handset’s predefined list of known networks.
[ 92 C2200 User Guide ]
Settings
GPRS settings |
GPRS(General Packet Radio Service) is a technology that allows mobile phones to be used for sending and receiving data over the mobile network. GPRS is a data bearer that enables wireless access to data network such as the Internet.
Before you can use GPRS technology
-You need to subscribe to the GPRS service. For availability and subscription to GPRS service, contact your network operator or service provider.
-You need to save the GPRS settings for the applications used over GPRS.
Power on |
If you select Power on and you are in a network that supports GPRS, the phone registers to the GPRS network and sending short messages will be done via GPRS. Also, starting an active packet data connection, for example, to send and receive
When needed |
If you select When needed, the phone will use a GPRS connection only if you start an application or action that needs it. The GPRS connection is closed after it is no longer required by any application.
n Note If there is no GPRS coverage and you have chosen Automatic, the phone will periodically try to establish a connection.
Reset settings |
You can reset your phone to its default configuration. To do so, proceed, as follows.
1.Select the Reset settings menu option.
2.You are requested to enter the
n Note The security code is preset to 0000. To change this, refer to page 91.
[ 93 C2200 User Guide ]