Connection is poor even when established.
Usage time of battery becomes shorter.
Connection is poor or is not audible in certain areas.
Standby duration of the phone gradually becomes shorter.
The bell does not ring, or lamp or LCD blinks only.
The phone gets warm.
LCD does not turn on.

Q&A

Please check to see if any problem which you may have with your phone is described here before taking it for service or calling a service engineer.

Q How do I view the list of outgoing calls, incoming calls and missed calls?

A Press .

Q How do I clear all call history?

A Press the left soft key and then .

Q How do I view all numbers saved in the memory?

A Press the up navigation key .

Q does not disappear from the screen.

A Check whether you are in a service area. If you continue to see , turn off the power and wait for approximately 2 minutes

before turning it back on. If there is no change, relocate to another area and check again.

Q

A In certain areas, signal strength can vary dramatically.

Try moving to a different location. Heavy network traffic may affect the ability to connect, or the stability of the call.

Q

A In certain areas, signal strength can vary dramatically.

Try moving to a different location. Heavy network traffic my affect the ability to connect, or the stability of the call.

Q&A

Q

A Remove and replace the battery and turn on the power.

If the phone still does not turn on, charge the battery and try again.

Q An echo can be heard during connection with a certain telephone in a certain area.

A It is called ‘Echo Phenomenon’. It occurs if the volume is too high or caused by special properties (semi electronic telephone exchange) of the machine on the other end.

Q

A During long calls, or if games/Internet are used for a long time, the phone may become hot. This is perfectly normal and has no effect upon the life of the product or performance.

Q

A The phone is set to ‘Vibrate only’ or ‘Silent’ in the Profiles menu. Please select ‘General’ or ‘Loud’

Q

A Batteries have a limited life. When the battery lasts for half its original time, it requires replacement. Only use authorised replacement parts.

Q

A If the battery time is short, it may be due to the user environment, or large volume of calls, or weak signals.

[ 98 C2200 User Guide ]

 

[ 99 C2200 User Guide ]