24C2500
Using the Menu• You can change the character case by pressing #
and you can change between the letter and number
mode by pressing #.
Using traditional text input
• Press a number 1key 9to , repeatedly until the
desired character appears. The characters available
depend on the language selected in the Settings menu,
Language.
• To input next letter you want, is located on, the same
key as the present one, wait until the cursor appears.
• The most common punctuation marks are available
under the number key *.
Using T9 text input
T9 input mode is only available for the modes and
languages on the method list. You can key in any letter
with a single keypress. The T9 text input is based on a
built-in dictionary.
• You can select T9 languages by selecting menu by
press Optioninto list, or in the editor screen long press
*enter T9 languages option. In T9 menu, you can
also select T9 off function.
!Note
The handset default setting for T9 languages is T9 on.
• Start writing a word by using the keys 2to 9.
Press each key only once for one letter. The word
changes after each keystroke.
• Example: To write HAPPYwhen the predictive test
mode is selected, press 4once for H, 2once for
A, 7once for P, 7once for other P, and 9once
for Y.
• When you have finished writing the word and it is
correct, confirm it by pressing Navigation, right key.
Pressing 0by adding a space to move the cursor.
• Start writing the next word.
Tips for writing text
• To move the cursor to the left, right, down or up, press
the Navigation key.
• To delete a character to the left of the cursor, press
Clear. Press and hold Clear to delete all characters
more quickly.
• To insert a special character, press *to get the table
with special characters, and then press OK back to
message.