Following are important instructions and information concerning the requirements for the gas supply and service for

gas dryers. _ Important Warning: The gas supply and service for a gas dryer must comply with all local codes

and ordinances. In the absence of any local codes or ordinances in your area, the gas supply and service for your gas dryer must comply with the latest edition of the National Fuel Cas Code, ANSI Z223.1/NFPA 54.

1.Gas supply requirements: Liquefied Petroleum (L.P.) Gas (2,500 Btu/ft3 (93.1 MJ/m3)) service must be provided at 10 + 1.5 in. water column pressure.

2.Important: DO NOT connect the dryer to the Liquefied Petroleum (LP) Gas service without converting the gas value.

3.A qualified technician must perform the LP Gas conversion. Contact your local gas service branch if you require additional assistance or information.

4.Isolate the dryer from the gas supply piping system by closing its individual manual shut-off valve, during any pressure testing of the gas supply system at test pressure equal to or less than 2/1 psi (3.45 kPa).

5.Supply Line Requirements. Your laundry room must have a rigid gas supply line to your dryer. In the United States, an individual manual shutoff valve MUST be installed within at least 6 feet (1.8m) of the dryer, in accordance with the National Fuel Gas Coide ANSI Z223.1. A 1/8 in. N.ET. pipe plug must be installed as shown.

. If using a rigid pipe, the rigid pipe should be 1/2 inch IPS. If acceptable under local codes and ordinances and when acceptable to your gas supplier, 3/8 inch approved tubing may be used where lengths are less than 20 feet (6. lm).

Larger tubing should be used for lengths in excess of 20 feet (6.1m). It is also important that you use pipe joint compound that is insoluble in LP gas.

. To reduce the danger of gas leaks, explosion, and fire, please follow and observe the following

instructions and WARNINGS:

Connect the dryer to the type of gas shown on the nameplate;

Use new flexible stainless steel connectors;

Use Teflon tape and pipe joint compound insoluble in LP gas on all pipe threads;

Purge gas supply of air and sediment before connecting the gas supply to the dryer; in order to

prevent gas valve contamination, before tightening connection between gas supply and dryer, pmge remaining air until odor of gas is identified; and

DO NOT use an open flame to inspect for gas

leaks; instead, use a non-corrosive leak detection fluid.

DONOT attempt any disassembly of the

dryer, any disassembly requires the attention and tools of an authorized and

qualified service person or company.

WARNING!

•Use a new AGA or CSA approved gas supply line.

•Install a shut-off valve.

•Securely tighten all gas connections.

•If connected to LP. have a qualified person make sure gas pressure does not exceed 13 in. water column.

•Examples of a qualified person include licensed heating personnel, authorized gas company personnel, and authorized service personnel.

•Failure to do so can result in death explosion, or fire.

20

Page 19 Page 21
Page 20
Image 20
LG Electronics DLE 5977W, DLE 5977 B, D 5988 B, D 5988W owner manual Instructions and Warnings
Page 19 Page 21

DLE 5977 B, D 5988 B, DLE 5977W, D 5988W specifications

LG Electronics has made significant strides in the home appliance industry, and their line of dryers, specifically the DLE 5977W, DLE 5977B, D5988B, and D5988W, showcases innovative technology and efficient design. These models are engineered to meet the demands of modern households while also providing a user-friendly experience.

One of the standout features of the DLE 5977 series is the Ultra Large Capacity design. With a capacity of 7.3 cubic feet, these dryers allow users to dry more clothes in a single load, reducing the time spent doing laundry. This capacity is particularly beneficial for larger families or anyone who frequently handles bulky items like comforters and jackets.

The dryers are equipped with the TurboSteam technology, which harnesses the power of steam to reduce wrinkles and refresh clothes. This feature is indispensable for those with busy schedules, as it allows garments to be revitalized and ready to wear in a matter of minutes, eliminating the need for ironing or additional washing.

Energy efficiency is another key characteristic of the DLE 5977W and its counterparts. These models are ENERGY STAR certified, meaning they meet or exceed federal guidelines for energy efficiency. This not only helps reduce utility bills but also reflects LG's commitment to environmental sustainability.

Smart technology integration is a prominent highlight across these models. The Link technology, compatible with Wi-Fi, allows users to connect their dryers to smartphones. This enables remote monitoring and control through the LG ThinQ app, giving users access to cycle information, maintenance alerts, and diagnostic help straight from their devices.

Safety features are also a priority in the design of the DLE 5977 and D5988 series. The models include features like the Smart Diagnosis, which can identify issues through a smartphone app, making it easier to troubleshoot and maintain the appliance. Additionally, with the Anti-Vibration technology, users can enjoy quieter operation without sacrificing performance, even during the spin cycles.

In conclusion, LG Electronics has produced a remarkable lineup with the DLE 5977W, DLE 5977B, D5988B, and D5988W. These models exhibit an impressive blend of capacity, efficiency, and cutting-edge technology, making them a smart choice for consumers seeking reliable and effective laundry solutions. Combining stylish design with practical features, LG continues to solidify its reputation as a leader in the home appliance market.
Top Page Image Contents