DV392H-N.CUSALLK_0959_ENG 2/20/08 9:37 AM Page 5
Hooking up the unit
Audio and Video Connection
The unit Audio/Video jacks are color coded (yellow for video, red for right audio and white for left audio). If your TV has only one input for audio (mono), connect it to the left (white) audio jack on the unit.
Hooking up the unit - more you can do
AS-Video connection
Connect the
You will still need to connect the left and right audio cables to the TV, or digital audio cable to your stereo.
BComponent Video Connections
Connect the COMPONENT/PROGRESSIVE SCAN OUTPUT jacks on the unit to the corresponding input jacks on your TV using a YPbPr cable.
•You will still need to connect the left and right audio cables to the TV, or digital audio cable to your stereo.
Resolution Setting
Connect the AC
C
A B C
•You can change the resolution for component video output. Press RESOLUTION repeatedly to select the desired resolution - 480i, 480p, 720p, 1080i, 1080p.
•For 720p and 1080p resolution on the component video output, only
•Depending on your TV, some of the resolution settings may result in the picture disappearing or an abnormal picture appearing. In this case, press RESOLUTION repeatedly until the picture
C Digital Audio Output Connection |
Connect one of the unit’s DIGITAL AUDIO OUTPUT (OPTICAL or COAXIAL) |
jacks to the corresponding jack on your amplifier. |
• If the audio format of the digital output does not match the capabilities of |
your amplifier, the amplifier will produce a strong, distorted sound or no |
sound at all. |
• To see the audio format of the current disc in the |
AUDIO. |
power cord into the power outlet.
• This unit does not perform internal (2 channel) decoding of a DTS sound |
track. To enjoy DTS multi channel surround, you must connect this unit to |
a DTS compatible amplifier via one of this unit’s digital audio outputs |
5
