37

Connections

Audio Connection to Optional Equipment

Connect the unit to your optional equipment for audio output.
You must set the Mode selection menu to “USB” or “ DISC” mode.
Amplifier equipped with 2-channel analog stereo or Dolby Pro
Logic ll / Pro Logic: Connect the AV IN/OUTjacks on the unit to
the audio left and right IN jacks on your amplifier, receiver, or
stereo system, using the audio cables.
Amplifier equipped with 2-channel digital stereo (PCM) or
audio / video receiver equipped with a multi-channel decoder
(Dolby Digital™, MPEG 2, or DTS): Connect one of the unit
Coaxial jack to the corresponding in jack on youramplifier. Use an
optional digital audio cable.
Digital Multi-channel sound
Adigital multi-channel connection provides the best sound quality.
For this you need a multi-channel audio / video receiver that sup-
ports one or more of the audio formats supported by your unit
such as MPEG 2, Dolby Digital and DTS. Check the receiver man-
ual and the logos on the front of the receiver.
NOTES
•
If the audio format of the digital output does not match the capabil-
ities of your receiver, the receiver produces a strong, distorted
sound or no sound at all.
• Six Channel Digital Surround Sound via a digital connection can
only be obtained if your receiver is equipped with a Digital Multi-
channel decoder.
• To see the audio format of the current DVD in the on-screen dis-
play, press AUDIO.
Setting up the Player (Continued)
R
L
AUDIO INPUT
DIGITAL INPUT
COAXIAL
Coaxial cable
(Not supplied)
Audio/ Video
cable (Supplied)
and/or
Amplifier(Receiver)
Right side of unit