Power Connections (Continued)

Connect the Automotive adapter

Caution

This unit and its automotive adapter are designed for use in vehi- cles that have 8.5-16 volt, negative ground electrical systems. (This is standard for most vehicles.) If your vehicle has a different type of electrical system, the DC power system cannot be used.

To prevent electrical shock and possible damage to your unit or vehicle, always unplug the automotive adapter from the cigarette lighter socket before you remove the plug from your unit.

A 3 amp. 250V fuse for protection is installed in the automotive adapter.

While the engine is being started, disconnect the automotive adapter from the car’s cigarette lighter socket.

Do not operate your unit when the car battery is discharged. Peak current from the car generator may cause the DC fuse to blow.

 

 

If the vehicle’s supply voltage drops below approximately 10

 

 

b

volts, your unit may not work properly.

a

Cigarette lighter socket

Do not leave your unit in a place where the temperature

 

 

exceeds 70°C (158°F), or the pick-up device may be damaged.

 

 

 

aConnect the automotive adapter to the DC IN jack on the unit.

bConnect the automotive adapter to the car’s cigarette lighter socket.

Examples include:

-Inside a car with the windows closed and in direct sunshine.

-Near a heating appliance.

Automotive adapter

This automotive adapter operates on DC 8.5-16V.

Contact an electrical parts distributor for assistance in selecting a suitable automotive adapter.

Manufactured by WANLIDA Digital Technology Co., Ltd.

14

Page 14
Image 14
LG Electronics DP781, DP280-N owner manual Connect the Automotive adapter