way to power down the charger is to unplug the power adaptor from the power outlet. Therefore, ensure that the power outlet is easily accessible.

The power adaptor must be connected correctly, as incorrect connection could damage the unit.

5.2Install the batteries

Warning

Always use the AAA rechargeable batteries supplied with your handset. If alkaline batteries are used instead of rechargeable batteries, “Warning Batt” will show on the display and the battery icon will blink quickly.

1 Slide out the battery cover.

2Place the batteries in the correct polarity as indicated and replace the cover.

5.3Charge the batteries

Warning

The handset must be charged for at least 24 hours before using it for the first time.

When the battery level becomes low, the low battery sensor warns you by blinking the battery icon. If this occurs during a conversation, an alert tone sounds to inform you that the battery is low. If the battery level becomes exceedingly low, the phone automatically switches off shortly after the icon starts blinking and any function in progress will not be saved.

1Place the handset in the cradle of

 

the charger with the display facing

 

forward. A beep is emitted if the

 

handset is placed correctly.

2

The battery icon

on the display

 

blinks during charging.

 

3

The battery icon

becomes

steady when the handset is fully charged.

Note

Optimal battery life is reached after 3 cycles of complete charging (over 15 hours) and discharging, allowing approximately 12 hours of talk-time and 150 hours of stand-by time.

The indoor and outdoor ranges of the handset are up to 50 meters and 300 meters, respectively. When the handset moves beyond the operation range, the

antenna icon

will blink.

Tip

When you reach the range limit the conversation may become crackly. Move closer to the base.

5.4Remove/Attach belt clip A belt clip allows you to carry your handset on your belt.

16

Getting started

Page 18
Image 18
Philips SE6590B/37 manual Install the batteries, Charge the batteries, Tip