9 Personal settings
9.1Change the Handset Name You can name the handset and display the handset name in idle mode. The default
handset name is Philips.
1 Press m in idle mode, scroll n to Personal Set and press o
Select.
2 Handset Name is highlighted. Press o Select.
3 The last stored name is displayed. Press c Clear to delete the
characters one by one or a long
press to delete all.
4 Enter the new name and press o OK to confirm.
•A validation tone is emitted and the screen returns to the Personal Set menu.
9.2Handset Tones
9.2.1Set the Ring Volume
Danger
When the handset rings during an incoming call, please do not hold the handset too close to your ear as the volume of the ringing tone may damage your hearing.
There are 5 ringer volume levels plus progressive and off. The default is level 3.
To adjust ring volume:
1Press m in idle mode, scroll n to Personal Set, and press o
Select.
2Scroll n to Handset Tones and press o Select. Ring Volume is highlighted. Press o Select.
3When using the handset with the
SE650/655/658 base station, scroll n to your desired volume level.
When using the handset with the
nto your desired volume.
•The ring tone sounds at each level.
4Press o OK to confirm.
•A validation tone is emitted and the screen returns to the Handset Tones menu.
Note
If ring volume is set to off, the icon will be displayed on the screen. If ring volume is set to progressive, the ringer will start at level 1 and go up one level volume every ring.
9.2.2 Set the Ring Tones
There are 15 ring tones available on your handset.
1Press m in idle mode, scroll n to Personal Set, and press o
Select.
2Scroll n to Handset Tones and press o Select. Then scroll n to Ring Tones and press o Select.
Personal settings | 21 |
