GENERAL SAFETY PRECAUTIONS

Keep cutting equipment well lubricated and properly maintained! A poorly lubricated chain is more likely to break and lead to increased wear on the bar, chain and drive sprocket.

Cutting equipment designed to reduce kickback

WARNING! Faulty cutting equipment or

! the wrong combination of bar and saw chain increases the risk of kickback! Only use the bar/saw chain combinations we recommend, and follow the filing instructions. See instructions under the heading Technical data.

The only way to avoid kickback is to make sure that the kickback zone of the bar never touches anything.

By using cutting equipment with ”built-in” kickback reduction and keeping the chain sharp and well- maintained you can reduce the effects of kickback.

Bar

The smaller the tip radius the lower the chance of kickback.

Chain

A chain is made up of a number of links, which are available in standard and low-kickback versions.

IMPORTANT! No saw chain design eliminates the danger of kickback.

WARNING! Any contact with a rotating

! saw chain can cause extremely serious injuries.

Some terms that describe the bar and chain

To maintain the safety features of the cutting equipment, you should replace a worn or damaged bar or chain with a bar and chain combinations recommended by Husqvarna. See instructions under the heading Technical Data for a list of replacement bar and chain combinations we recommend.

Bar

Length (inches/cm)

Number of teeth on bar tip sprocket (T).

Chain pitch (inches). The spacing between the drive links of the chain must match the spacing of the teeth on the bar tip sprocket and drive sprocket.

Number of drive links. The number of drive links is determined by the length of the bar, the chain pitch and the number of teeth on the bar tip sprocket.

Bar groove width (inches/mm). The groove in the bar must match the width of the chain drive links.

Chain oil hole and hole for chain tensioner. The bar must be matched to the chain saw design.

Chain

Chain pitch (inches)

Drive link width (mm/inches)

Number of drive links.

Sharpening your chain and adjusting depth gauge setting

General information on sharpening cutting teeth

Never use a blunt chain. When the chain is blunt you have to exert more pressure to force the bar through the wood and the chips will be very small. If the chain is very blunt it will produce wood powder and no chips or shavings.

12 – English

Page 12
Image 12
Husqvarna 1153183-95 manual Cutting equipment designed to reduce kickback, Bar, Chain

1153183-95 specifications

The Husqvarna 1153183-95 is an innovative product from Husqvarna, well-known for delivering high-quality outdoor power equipment. This model is specifically designed to cater to the needs of both amateur gardeners and professional landscapers. Its advanced features and technologies make it a standout choice in the market.

One of the primary features of the Husqvarna 1153183-95 is its durability. Constructed with robust materials, the equipment is built to withstand the rigors of frequent use, ensuring longevity and reliability. The design is not only sturdy but also lightweight, allowing for easier maneuverability.

The 1153183-95 incorporates a powerful engine that delivers superior performance. This engine is engineered for optimum fuel efficiency, ensuring that users can complete their tasks without the worry of frequent refueling. Additionally, the low-emission technology in the engine contributes to a reduced environmental impact, aligning with modern sustainability goals.

An important aspect of the Husqvarna 1153183-95 is its user-friendly controls. The design includes ergonomic handles that provide comfort during extended use. These features reduce fatigue, allowing users to work longer and more efficiently. The intuitive control layout ensures that even novice users can operate the device without difficulty.

Another noteworthy technology included in the 1153183-95 is its cutting system. With precision blades, the equipment ensures clean and effective cutting, making it ideal for various landscaping tasks. The adjustable settings allow users to customize the cutting height, providing versatility based on the specific requirements of a project.

Moreover, this model features an advanced air filtration system. This system not only prolongs engine life but also enhances its performance by ensuring a clean air supply to the engine. This technology reduces maintenance needs and contributes to a smooth operation.

In summary, the Husqvarna 1153183-95 is a powerful and efficient outdoor equipment option, distinguished by its robust construction, user-friendly features, and innovative technologies. It is designed to meet the demands of both casual users and professionals, providing reliability and performance for a myriad of landscaping tasks. Whether you are maintaining a garden or managing a larger landscape, this model efficiently combines power, efficiency, and ease of use, making it a valuable addition to any outdoor toolkit.