MSS6000 | Installation Instructions |
ADJUSTMENTS
Display Height Adjustment
CAUTION: Displays are fragile. Allowing the display to drop to bottom of stand may result in damage to the display.
1.While holding the display, loosen the four height adjustment screws. (See Figure 9)
CAUTION: Make sure all cables and wires are not pinched when raising or lowering display.
2.Position display at the desired height.
3.Tighten four height adjustment screws. (See Figure 9)
5" Max. | Height Adjustment |
Screws | |
| (2 each side) |
Figure 9
Display Roll Adjustment
The MSS6000 provides limited display roll adjustment for the purpose of leveling the display.
To level the display:
1.Loosen upper and lower roll adjustment nuts. (See Figure 10)
2.Level display. (See Figure 10)
3.Tighten roll adjustment nuts.
2 deg. Max.
Roll Adjustment Nuts (2 places) 
NOTE: Adjustment nuts located between slide plate and back plate of base assembly.
Figure 10
8
