Manuals / Husqvarna / Lawn and Garden / Chainsaw

Husqvarna 1153183-95 manual Recommended original and replacement bar and chain combinations

Models: 1153183-95

1 44

Download 44 pages 27.55 Kb

Page 39

Recommended original and replacement bar and chain combinations

TECHNICAL DATA

Recommended original and replacement bar and chain combinations

This Husqvarna chain saw model is in the ANSI category of saws above 3,8 cu. in. and is not required to comply with low kickback performance requirements. However, for this model we recommend the following cutting equipment. The combinations of power head, bar and chain have been investigated in accordance with the kickback and vibration requirements of ANSI B 175.1–1991.

Bar			Chain
			Chain
Length, inch	Pitch, inch	Max. radius nose wheel

24-42	0,404	ATL 1,65”	Husqvarna H64, Oregon 27

Listed ATL is the Oregon designation of Armour Tip Large hard nose bar.

WARNING! This chain saw model is capable of severe kickback that could result in serious injuries

! to the user. Do not operate this saw unless you have extraordinary cutting needs and experience and specialized training for dealing with kickback. Saws with signiﬁcantly reduced kickback potential are available. Always use the safest saw and cutting equipment applicable to your cutting need.

Saw chain ﬁling and ﬁle gauges

English – 39

Image 39

Husqvarna 1153183-95 manual Recommended original and replacement bar and chain combinations, Saw chain ﬁling and ﬁle gauges

Contents

3120XP Operator’s manualEnglish KEY TO SYMBOLS Symbols on the machineSymbols in the operator’s manual KEY TO SYMBOLS Contents CONTENTSDear customer INTRODUCTIONWhat is what on the chain saw? WHAT IS WHAT?GENERAL SAFETY PRECAUTIONS Before using a new chain sawAlways use common sense GENERAL SAFETY PRECAUTIONS Machine′s safety equipmentPersonal protective equipment Chain brake and front hand guardGENERAL SAFETY PRECAUTIONS Right hand guard Will my hand always activate the chain brake during a kickback?Throttle lockout Chain catcherGeneral rules Stop switchCutting equipment MufﬂerSharpening your chain and adjusting depth gauge setting Cutting equipment designed to reduce kickbackGENERAL SAFETY PRECAUTIONS WARNING! Departure from the sharpening instructions considerably GENERAL SAFETY PRECAUTIONSmin 4 mm 5/32 General advice on adjusting depth gauge setting increased if the depth gauge setting isAdjustment of depth gauge setting Tensioning the chainLubricating cutting equipment GENERAL SAFETY PRECAUTIONSChain drive sprocket GENERAL SAFETY PRECAUTIONSFilling with chain oil Checking chain lubricationCheck the chain daily for Visible cracks in rivets and links GENERAL SAFETY PRECAUTIONSFitting the bar and chain ASSEMBLYTwo-stroke oil FUEL HANDLINGFuel GasolineFueling Chain oilFUEL HANDLING FUEL HANDLING Fuel safetyTransport and storage Long-term storageWarm engine STARTING AND STOPPINGStarting and stopping Cold engineSTARTING AND STOPPING StoppingGeneral working instructions Basic safety rulesWORKING TECHNIQUES Before use6 Always use a fast cutting speed, i.e. full throttle WORKING TECHNIQUESGeneral Basic cutting techniqueWORKING TECHNIQUES WARNING! Never use a chain saw byWORKING TECHNIQUES Tree felling techniqueDirectional cuts WORKING TECHNIQUESClearing the trunk and preparing your retreat Felling WARNING! Unless you have specialFreeing a ”trapped tree” Freeing a tree that has fallen badlyGeneral advice WORKING TECHNIQUESHow to avoid kickback What is kickback?WORKING TECHNIQUES Fine adjustment MAINTENANCEFunction, Basic settings, Fine adjustment Basic settings and running inMAINTENANCE Checking, maintaining and servicing chain saw safety equipmentCorrectly adjusted carburetor High speed jet HRight hand guard MAINTENANCEThrottle lockout Chain catcherMAINTENANCE MufﬂerStarter Changing a broken or worn starter cordMAINTENANCE Tensioning the recoil springChanging a broken recoil spring Fitting the starterMAINTENANCE Air ﬁlterSpark plug Lubricating the bar tip sprocketMAINTENANCE Adjustment of the oil pumpNeedle bearing lubrication Cooling systemWeekly maintenance Maintenance scheduleMAINTENANCE Daily maintenanceTechnical data TECHNICAL DATARecommended original and replacement bar and chain combinations Saw chain ﬁling and ﬁle gaugesTECHNICAL DATA OWNER′S WARRANTY RESPONSIBILITIES FEDERAL EMISSION CONTROL WARRANTY STATEMENTYOUR WARRANTY RIGHTS AND OBLIGATIONS MANUFACTURER′S WARRANTY COVERAGEEMISSION CONTROLWARRANTY PARTS LIST MAINTENANCE STATEMENTFEDERAL EMISSION CONTROL WARRANTY STATEMENT Other safety precautions AMERICAN STANDARD SAFETY PRECAUTIONSSafety precautions for chain saw users Kickback safety precautionsPage ´z+U2G¶5i¨ ´z+U2G¶5i¨ Original instructions