MAINTENANCE

•Pull out the cord approx. 30 cm (12 inches) and hook it into the notch in the rim of the pulley. Release the recoil spring by letting the pulley rotate slowly backwards.

•Undo the screw in the centre of the pulley and remove the pulley. Insert and fasten a new starter cord to the pulley. Wind approx. 3 turns of the starter cord onto the pulley. Connect the pulley to the recoil spring so that the end of the spring engages in the pulley. Fit the screw in the center of the pulley. Insert the starter cord through the hole in the starter housing and the starter handle. Make a secure knot in the end of the starter cord.

Tensioning the recoil spring

•Hook the starter cord in the notch in the pulley and turn the starter pulley about 2 turns clockwise.

Note! Check that the pulley can be turned an additional 1/2 turn when the starter cord is pulled all the way out.

Changing a broken recoil spring

•Lift up the starter pulley. See instructions under the heading Changing a broken or worn starter cord. Remember that the recoil spring is coiled under tension in the starter housing.

•Remove the recoil spring from inside the pulley by tapping the pulley lightly with its inside face downwards against a work bench or the like. If the spring pops out during fitting, wind it up again, working from the outside in towards centre.

•Lubricate the recoil spring with light oil. Fit the cassette with recoil spring in the starter. Fit the starter pulley and tension the recoil spring.

Fitting the starter

•To fit the starter, first pull out the starter cord and place the starter in position against the crankcase. Then slowly release the starter cord so that the pulley engages with the pawls.

•Fit and tighten the screws that hold the starter.

34 – English

Page 33 Page 35
Page 34
Image 34
Husqvarna 1153183-95 manual Tensioning the recoil spring, Changing a broken recoil spring, Fitting the starter
Page 33 Page 35

1153183-95 specifications

The Husqvarna 1153183-95 is an innovative product from Husqvarna, well-known for delivering high-quality outdoor power equipment. This model is specifically designed to cater to the needs of both amateur gardeners and professional landscapers. Its advanced features and technologies make it a standout choice in the market.

One of the primary features of the Husqvarna 1153183-95 is its durability. Constructed with robust materials, the equipment is built to withstand the rigors of frequent use, ensuring longevity and reliability. The design is not only sturdy but also lightweight, allowing for easier maneuverability.

The 1153183-95 incorporates a powerful engine that delivers superior performance. This engine is engineered for optimum fuel efficiency, ensuring that users can complete their tasks without the worry of frequent refueling. Additionally, the low-emission technology in the engine contributes to a reduced environmental impact, aligning with modern sustainability goals.

An important aspect of the Husqvarna 1153183-95 is its user-friendly controls. The design includes ergonomic handles that provide comfort during extended use. These features reduce fatigue, allowing users to work longer and more efficiently. The intuitive control layout ensures that even novice users can operate the device without difficulty.

Another noteworthy technology included in the 1153183-95 is its cutting system. With precision blades, the equipment ensures clean and effective cutting, making it ideal for various landscaping tasks. The adjustable settings allow users to customize the cutting height, providing versatility based on the specific requirements of a project.

Moreover, this model features an advanced air filtration system. This system not only prolongs engine life but also enhances its performance by ensuring a clean air supply to the engine. This technology reduces maintenance needs and contributes to a smooth operation.

In summary, the Husqvarna 1153183-95 is a powerful and efficient outdoor equipment option, distinguished by its robust construction, user-friendly features, and innovative technologies. It is designed to meet the demands of both casual users and professionals, providing reliability and performance for a myriad of landscaping tasks. Whether you are maintaining a garden or managing a larger landscape, this model efficiently combines power, efficiency, and ease of use, making it a valuable addition to any outdoor toolkit.
Top Page Image Contents