10 Plasma TV
Installation
InstallationInstallation
Owners Manual
1.5V
1.5V
Batteries Power Cord
LIGHT
TV/VIDEO
MODE
COMP/RGB/DVI
MUTE SURF
VOLCH
INFO
SAPRATIO
CC
MENU
SOUNDVIDEO
EXIT
PLAYPAUSESTOPRECORD
PIPPIPCH-PIPCH+ PIPINPUT
FREEZE
ADJUST
OK
ZOOMSIGNALSWAP
REWFF SKIP
POWER
TIMER
FLASHBK
Remote Control
75Round Cable
Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer
where you purchased the product.
- Secure the TV assembly by attaching it to a wall for additional support.

Attaching the

Attaching the TV assembly to the wall

TV assembly to the wall

Install the TV brackets on the TV as shown.
Insert the 2 bolts and tighten securely, in the holes on the bracket. (42)
After removing the existing bolts,Insert the 4 bolts and tighten securely,
in the holes on the bracket.(50)
Install the wall brackets on the wall with 4 bolts*,
(not supplied with the product), as shown.
Match the height of the TV brackets and the wall brackets.
Check to be sure the brackets are tightened securely.
Secure the TV assembly to the wall with strong strings or
wound wire cables, (not supplied with the product), as
shown.
2-TV brackets
2-Wall brackets 2-TV bracket bolts(42)
4-TV bracket bolts(50)