LG Electronics E2290V owner manual Connecting with the PC, AV equipment

Connecting the Display

Connecting with the PC

1.	Before setting up the monitor, ensure that the power to the monitor, the computer
2.	system, and other attached devices is turned off.
	Connect signal input cable 1 and power cord 2 in order, then tighten the screw

of the signal cable.

AConnect DVI-D(Digital signal) Cable

BConnect D-sub(Analog signal) Cable

CConnect HDMI Cable

NOTE

This is a simplified representation of the rear view.

This rear view represents a general model; your display may differ from the view as shown.

AV equipment Varies according to model.

(Set-Top Box, DVD,

Video,

Video Game Console)

* HDMI is optimized on the AV equipment. * Not supported PC

DVI-D (This feature is not available in all countries.)

Connect the signal input cable and tighten it up by turning in the direction of the arrow as shown in the figure.

Headphone/Earphone Input

Wall-outlet type

When using a D-Sub signal input cable connector for Macintosh

Mac adapter : For Apple Macintosh use,

aseparate plug adapter is needed to change the 15 pin high density (3 row) D- sub VGA connector on the supplied cable to a 15 pin 2 row connector.

6