LG Electronics ESG-2008-V1 Flex MULTI-SPLIT DUAL-ZONE & TRI-ZONE, Electrical Specifications

FLEX MULTI-SPLIT • DUAL-ZONE & TRI-ZONE											CEILING CASSETTE
					Indoor		Outdoor	Amps
ELECTRICAL & REFRIGERATION • QUICK REFERENCE											DUCT-FREE
											FLOOR STANDING &
			Electrical Specifications
											AIR CONDITIONING
		A/C	LMN090CE	9,000	36V DC		—	0.5	—	—
		Type	Model	BTUs	Voltage			Rated	MCA*	MOP**
											SYSTEMS
	Units	A/C	LMN120CE	12,000	36V DC		—	0.5	—	—
	Flex Multi-
	Split Indoor	A/C	LMAN090CNS	9,000	36V DC		—	1.3	—	—
		A/C	LMAN120CNS	12,000	36V DC		—	1.3	—	—	High-Capacity Split Systems
		A/C	LMAN121CNM	12,000	36V DC		—	0.5	—	—
											The Floor Standing and Ceiling Cassette models
		H/P	LMN090HE	9,000	36V DC		—	0.5	—	—
											are ideal for light commercial applications and
		H/P	LMAN090HNS	9,000	36V DC		—	1.3	—	—
											work well in large, open spaces. The Ceiling
		H/P	LMN120HE	12,000	36V DC		—	0.5	—	—
											Cassette is a useful alternative when floor space
		H/P	LMAN120HNS	12,000	36V DC		—	1.3	—	—
											is limited.
		H/P	LMAN121HNM	12,000	36V DC		—	0.5	—	—
												Duct-Free Split
											The outdoor unit for both models operate on	Floor Standing Indoor Units
	Outdoor	A/C	LMU180CE	18,000			230/208	8.8	15	20
											high-voltage (230/208) power and models one	White Finish
	Units	A/C	LMU240CE	24,000			230/208	10.2	20	25
											or two compressors, depending on the size.
		A/C	LMU360CE	36,000			230/208	16.6	30	40
		H/P	LMU180HE	18,000			230/208	8.8	15	20
		H/P	LMU240HE	24,000			230/208	10.2	20	25
		H/P	LMU360HE	36,000			230/208	16.6	30	40
All equipment are single phase.
								Wire Size
NOTE: Please see local electrical codes for proper wire specifications.
						Minimum wiring requirements suggested by manufacturer
*Minimum Circuit Ampacity **Maximum Overcurrent Protection ***For LMU360CE,
						Minimum AWG				14-3
LMU360HE										12-3***		Duct-Free Split
						Indoor/Outdoor Connecting Cable Minimum AWG 18-4
												Ceiling Cassette Indoor Units
												White Finish

		Refrigerant Line & Formula Specifications†
				Pipe size		Additional	Max. Pipe	Max.
	Type	Model	BTUs	Liquid Suction		Refrigerant	Length	Elevation
Flex Multi-	A/C	LMN090CE	9,000	1/4"	3/8"	0.22 oz./ft.	50'	25'
Split	A/C	LMAN090CNS	9,000	1/4"	3/8"	0.22 oz./ft.	50'	25'
	A/C	LMN120CE	12,000	1/4"	3/8"	0.22 oz./ft.	50'	25'
	A/C	LMAN120CNS	12,000	1/4"	3/8"	0.22 oz./ft.	50'	25'
	A/C	LMAN121CNM	12,000	1/4"	3/8"	0.22 oz./ft.	50'	25'
	H/P	LMN090HE	9,000	1/4"	3/8"	0.22 oz./ft.	50'	25'
	H/P	LMAN090HNS	9,000	1/4"	3/8"	0.22 oz./ft.	50'	25'
	H/P	LMN120HE	12,000	1/4"	3/8"	0.22 oz./ft.	50'	25'
	H/P	LMAN120HNS	12,000	1/4"	3/8"	0.22 oz./ft.	50'	25'
	H/P	LMAN121HNM	12,000	1/4"	3/8"	0.22 oz./ft.	50'	25'	24,000 BTUs	34,000 BTUs
								44,000 BTUs

NOTE: Systems having the outdoor unit mounted above the indoor unit (e.g. basement installations) have the following					24,000 BTUs
		OUTDOOR UNIT		Figure A.	Single-ZoneSplit Systems	Single-ZoneSplit Systems
additional requirement: For systems with maximum elevation of 25 ft. (see chart above and Figure A), refrigerant lines				Example: 25 ft.	Floor Standing	Ceiling Cassette
must be oil-trapped between 8 ft. and 16.4 ft. of elevation. For systems with elevation of greater than 25 ft. (see chart	OIL TRAP			maximum
above), refrigerant lines must be oil-trapped at least every 16.4 ft. of elevation.
				elevation.
†Dual-Zone: Exterior unit has sufficient refrigerant for charging two indoor coils and a 25 ft. line set per indoor unit.	INDOOR UNIT		25' maximum
Tri-Zone: Exterior unit has sufficient refrigerant for charging three indoor coils and a 25 ft. line set per indoor unit.			8' minimum
			16.4' maximum

FLOOR STANDING & CEILING CASSETTE

29 30