WARNING! The desktop charger and the travel charger cannot be used at the same time because the battery may be altered or damaged.
Battery Information and Care
1.Never use an unauthorized battery since this could damage the phone and / or battery and could cause the battery to explode.
2.You do not need to wait until the battery is empty before recharging the battery.
3.Use only LG chargers specific to your phone model since they are designed to maximize battery life.
4.Do not disassemble or
5.Keep the battery’s metal contacts clean.
6.Replace the battery when it no longer provides acceptable performance. The battery can be recharged several hundred times before requiring replacement.
7.Recharge the battery after long periods of
8.Do not expose the battery charger to direct sunlight or use it in areas of high humidity such as a bath- room.
9.Do not leave the battery in hot or cold places as it may deteriorate battery performance.
10.Battery life varies due to factors such as location, usage patterns, etc.
11.Using features such as backlight settings, search- ing for service, the MiniBrowser, data connectivity, and synchronization affects the battery life and talk / standby times.
LG-IP3100
Chapter 2 Basic Functions
Turning Your Phone On and Off
Turning Your Phone ON
1)Fully extend the antenna to receive the best reception.
2)Press 
for two seconds. The phone will display “Searching for Service” until it locates a signal, then it will automatically enter Standby mode – the phone’s idle state. At this point, you’re ready to begin making and receiving calls.
Turning Your Phone OFF
Press 
for two seconds until the screen displays its powering off message (for example, “LG Goodbye!”).
Signal Strength
Call quality is always best when the antenna is fully raised. If you’re inside a building, being near a window may give you better reception.You can see the strength
of your signal by the signal indicator (
) on your phone’s display screen.
Power Save Mode
When the phone is in an area without service for about 15 minutes, it stops searching for service and enters into the Power Save Mode. When your phone activates this feature, Power Save is displayed on your screen. The phone automatically checks for service periodically or you can check manually by pressing any key.
Chapter 2
Basic Functions
20 | 21 |
