LG Electronics ips231p owner manual Connecting with the PC, Varies according to model

Connecting the Display

Connecting with the PC

1.	Before setting up the monitor, ensure that the power to the monitor, the computer
2.	system, and other attached devices is turned off.
	Connect signal input cable 1 and power cord 2 in order, then tighten the screw
	of the signal cable.
	A Connect DVI-D(Digital signal) Cable	C Connect Audio Cable

BConnect D-sub(Analog signal) Cable

NOTE

This is a simplified representation of the rear view.

This rear view represents a general model; your display may differ from the view as shown.

When using a D-Sub signal input cable connector for Macintosh

Mac adapter : For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector.

Varies according to model.

Wall-outlet type

Connect the signal input cable and tighten

it up by turning in the direction of the arrow as shown in the figure.

DVI-D (This feature is not available in all countries.)

3. Press the power button on the front panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically.

(Only Analog Mode)

Power Button

NOTE

‘Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.

‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution.

10