Screen blinks | LG Electronics ips231p instruction

Troubleshooting

Display image is incorrect

●The screen color is mono or abnormal.

●The screen blinks.

•Check if the signal cable is properly connected and use a screwdriver to fasten if necessary.

•Make sure the video card is properly inserted in the slot.

•Set the color setting higher than 24 bits (true color) at Control Panel - Settings.

•Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.

Do you see an "Unrecognized monitor, Plug&Play (VESA

DDC) monitor found" message?

●Have you installed the display driver?

•Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lg.com.

•Make sure to check if the video card supports Plug&Play function.

25

Image 26

LG Electronics ips231p owner manual Screen blinks, Screen color is mono or abnormal

Contents

LCD Monitor Do not use a damaged or loose plug Safety PrecautionsUse only a properly grounded plug and receptacle Make sure to remove all cables before moving the product Do not put heavy objects on the product on sit upon itMake sure to turn off the product Do not place the product face down Keep the product away from water Safety Precautions Users Guide/Cards AccessoriesThank for selecting LGE products Audio Cable Connecting the Display Connecting the stand base or Removing the stand base After installation, adjust the angle as shown below Positioning your display Ergonomic Using the Pivot function Landscape & Portrait You can rotate the panel 90o clockwise Connecting with the PC Varies according to model Menu Button OSD LOCKED/UNLOCKED Control Panel FunctionsFront Panel Controls Source Hot key Auto Image AdjustmentIPS231P/IPS231B 1920 x On Screen Display OSD Control Adjustment Screen Adjustment Picture On Screen DisplayOSD Selection and AdjustmentColor Display Volume Others UeOn Screen DisplayOSD Selection and Adjustment Mode Menu Name Icons Sub- menus Brightness Contrast Sharpness Exit Exit User SIX Color PresetReset HUE Phase Horizontal Vertical Clock Reset Language PowerIndicator White Menus SRGB Exit Exit Is the power indicator flickering? TroubleshootingIs the power cord of the display connected? Do you see OSD Locked when you push Menu button? Display image is incorrect Screen blinks Screen color is mono or abnormal Environment al Conditions SpecificationsPower Consumption Dimensions & Weight Wall Preset Modes Resolution Indicator Installing the Wall mount plate Wall Mount pad Wall mount plateSeparate purchaseKensington Security Slot Model