Your phone provides a number of control functions that you can use during a call. To access these functions during a call, press the left soft
key [Options].
DURING A CALL
The menu displayed on the handset screen during a call is different than the default main menu displayed when in idle screen, and the options are described below.
SPEAKER PHONE
During call you can activate speaker phone by pressing the LOCK key and then pressing the [ ] key.
MAKING A SECOND CALL (NETWORK DEPENDENT)
You can get a number you wish to dial from the phonebook to make a second call.
SWITCHING BETWEEN TWO CALLS
To switch between two calls, press key or the left soft key, and then select Swap call.
ANSWERING AN INCOMING CALL
To answer an incoming call when the handset is ringing, simply slide open the phone. If the phone
is already open press the key. The handset is also able to warn you of an incoming call while you are already on a call. A tone sounds in the earpiece, and the display will show that a second
call is waiting.
This feature, known as Call waiting, is only available if your network supports it. If Call waiting is on, you can put the first call on hold and answer the second, by pressing the left soft key.
REJECTING AN INCOMING CALL
You can reject an incoming call without answering
by simply pressing the key.
During a call, you can reject an incoming call by
pressing the key.
MUTING THE MICROPHONE
You can mute the microphone during a call by tapping the [Mute] key in the bottom right. The handset can be unmuted by tapping the [Unmute]. When the handset is muted, the caller cannot hear you, but you can still hear them.
DTMF TONES WHILE
CALLING
To switch on DTMF tones while calling (e.g. to use the phone with an automatic switchboard) tap [Options] followed by Send DTMF – DTMF on. Select DTMF off to disable DTMF tones. DTMF tones are normally on.
The display and keypad backlights will turn off after a few seconds while in a call if no keys are pressed. To turn on the backlight press any key. DTMF is not sent when the backlight is off.
To activate the keypad in a call, press the on the side.
23