Connecting the Display
A3
Unfolding the stand base
Before setting up the monitor, ensure that the power to the monitor, the
computer system, and other attached devices is turned off.
1.
Place the monitor with its front facing downward on a soft cloth.
2. Hold the stand base and lift it up following the sequence as shown in the
picture.
3.
Pull the stand base down at the same spot shown in the picture, and
the stand will be unfolded.
4.
Place the monitor upright and adjust the stand
base to the desired angle. Adjust the stand
base's angle by holding the edges of the monitor
gently with both hands.
Important
This illustration depicts the typical connection procedure. Your monitor
may differ from the one displayed in the pictures above.
Do not touch or apply force to the monitor's screen while expanding or folding
the stand base.