LG Electronics L197WH

Connecting the Display

To arrange the cables

1. Insert and screw the cable holder into the hole in the back of the stand until it will not

turn any more as shown in the following figure.

Cable Holder

After connecting the cables neatly, arrange the cables to the Cable Holder as shown in

the following figure.

Contents

Main On Safety Important Precautions Important Precautions On Installation On Cleaning On Repacking On Disposal Connecting the Display Unfolding the stand base Page Page A6 Connecting the Display Using the Computer 2. 1. 1 2 Page A8 Control Panel Functions Control Function Front Panel Controls Bottom A9 Control Panel Functions Control Function - + - + - + - + - The following table indicates all the On Screen Display control, adjustment, and setting menus. Page A13 PICTURE COLOR A14 TRACKING POSITION A15 On Screen Display (OSD) Selection and Adjustment SETUP - A16 FLATRON F-ENGINE No image appears Check the following before calling for service. Do you see a "OSD LOCKED" message on the screen? No image appears Display image is incorrect Important Have you installed the display driver? Display image is incorrect Page Indicator Preset Modes (Resolution) Signal Connector Pin Assignment Installing the Wall mount plate This monitor satisfies the specifications of the Wall mount plate or the interchange device. 2. 1. 3.