Owner’s Manual 13
ENGLISH
Installation
Preparation of Chassis
1.Inser t the guide panels into the guides
of the air conditioner.Fasten the
curtains to the unit with screws
(Type A).
:Use a long screwdriver and
installing the screws will be easier.
2.Cut the adhesive-backed seal strip
(Type E) to the window width.
Remove the backing from the seal
strip and attach the seal strip to the
underside of the bottom window.
3.Locating unit in window
Open the window and mark center line
on the center of the inner sill.
4. Attach L bracket
4-1.Install the L brackets behind the
inner window sill, with short side of
bracket as shown.Use the 2 screws
(Type A) provided.
4-2.The bracket helps to hold unit
securely in place.Be sure to place
bracket edge flush against back of
inner sill.
Tip!
Seal Strip
(Type E)
Room Side
Center Line
Inner Sill
Outside
Inside
L
Bracket
Outer Sill
Inner Sill Type A
8"
8"
Center Line
Type A
Type A