Operating Instructions

CAUTION:The Remote Controller will not function properly if strong

light strikes the sensor window of the air conditioner or if there are

obstacles between the Remote Controller and the air conditioner.

How to Insert Batteries

Auto
Swing
Power
Temp
Fan Speed
Timer Mode

Temperature Control

Fan Speed

Power

Operation Mode Selector

On/Off Timer

1.Remove the cover from the back of the remote
controller
2.Inser t two batteries.
Be sure of the polarity when installing the
batteries.
Be sure that both batteries are new.
3.Re-attach the cover.
Do not use rechargeable
batteries.Such batteries
differ from standard dry cells
in shape, dimensions, and
performance.
Remove the batteries from
the remote controller if the air
conditioner is not going to be
used for an extended length
of time.
Operation starts when this button is pressed and
stops when you press the button again.
For increased power while cooling, select a higher
fan speed.
3 steps: High
Low
Med
The timer can be set to start and stop the unit in
hourly increments (up to 12 hours).
Select cooling mode to cool the room.
Select energy saver mode for energy saving
operation.
Select fan mode for basic ventilating fan operation.
Select dry mode for dry operation.
The thermostat monitors room temperature to
maintain the desired temperature.
The thermostat can be set between 60 F~86 F
(16 C~30 C).
The unit takes an average of 30 minutes to adjust the
room temperature by 1 F.
ENGLISH
Owner s Manual 17
Remote Controller