ENGLISH

Owner’s Manual 11

OperatingInstructions

Constantly On.
FAN
SPEED
TIMER
High
Low
4hr. On/Off
2hr. On/Off
HUMIDITY
CONTROL
BUCKET
FULL
POWER
AUTO RESTART
HUMIDITY
SETTING
76
543 2 1

CONTROL PANELHAS FOLLOWING

1.POWER key
---Pressing this key once turnsthe dehumidifier "ON" and pressing again turns the
dehumidifier"OFF".
2.HUMIDITY CONTROL keys --- Areusedtoselectthedesiredhumiditysetting.
:Used to raise the desired humidity setting.
:Used to lower the desired humidity setting.
Thedesired humidity can be selected within a range of 35%to 70% RH in increments of 5%.
Ifyou press the keyonce again at 35%RH, "On" mode is selected. In "On" mode the unit operates
continuously,regardless of humidity conditions.
3.HUMIDITY SETTING display --- The desired humidity selected isdisplayed here.
4.FAN SPEED key --- Is used to set the fan speed as "High" or "Low".
Pressingthis key changes the fan speed from High Low High.
Theselected fan speed is indicated by indicator lights marked "High" and "Low".
5.TIMER key--- It is used to select the type of operation.
Selecteither 2 or 4 hr. On/Off for cycled operation.
Inthis case the unit will run for 2 or 4 hours, and then shut off completely for 2 or 4 hours. The cycle will
repeatuntil you change the setting.
WhenTIMER key is pressed, the TIMER indicator lights shift from 2hr.On/Off to 4hr.On/Off.
6.BUCKET FULL Indicator --- This light glows when the bucket is full and needs to be emptied. It also
glows,when the bucket is not properly positioned. When bucket full indicator light glows, the compressor
andfan will turn "OFF".
7.AUTO RESTART --- Once the p oweris restored after apower outage, the unit begins to operate at its
previousoperation setting. The fan will run by default for 2 minutes. After 2 minutes both fan and
compressorwill be ON or OFF depending on the humidity conditions.
TOOPERATE THE DEHUMIDIFIER:
1.Plug the power cord into the electrical outlet. Press the POWER key.
2.Set the Humidity control anywhere between 35% to 70% for normal operation.
Forless humidity, press the HUMIDITYCONTROL key.
Forhigher humidity, press the HUMIDITYCONTROL key.
3.Press the TIMER key, to set the amount of time for which you want the unit to cycle On and Off. The time
canbe set for 2 hours or 4 hours.
4.If you want to change the fan speed, press the FAN SPEED key. Each time the FAN SPEED key is
pressedthe fan speed changes as High Low High.
5.Press the POWER key to stop the unit manually.
Waterbucket must be properly installed.
Thedehumidifier will not run if the bucket is not properly installed.
Thedehumidifier shuts off when the desired humidity setting is reached.
NOTICE
Operating Instructions