CD Playback
Basic Playback
1.Press FUNC. (or FUNCTION) button to select CD/MP3 function.
If no disc is loaded then “NO DISC” is displayed.
2.Press Z OPEN/ CLOSE and place the disc into the disc tray.
ote
To load an 8cm (3 inch) disc, put it onto the inner circle of the tray.
3.Press Z OPEN/ CLOSE to close the disc compartment.
Audio CD: “READING” appears in the display window, and then the total number of tracks and the playing time are displayed.
MP3 CD: “READING” appears in the display window, and then the total number of files is displayed.
4.Press PLAY (B) on the front panel or PLAY/
PAUSE (B/[]) on the remote control.
In addition, you can also play an Audio CD or MP3 CD using the NUMBER buttons.
Pause Playback
Press SET/CD[] on the front panel or PLAY/ PAUSE (B/[]) on the remote control during play- back.
Press this button again it to resume play.
Stop Playback
Press STOP(x) on the front panel or CD STOP(x) on the remote control during playback.
Skipping a Track
•Press the BB > button to go to the next track.
•When the . bb button is pressed once midway through a track, the player returns to the start of that track. When it is pressed again, a track is skipped each time the button is pressed.
Searching a Track
After pressing and holding . bb/BB > button on the remote control during playback, then release at the point you want.
ote
This function is not available to play a MP3 file.
Program Play
You can arrange the order of the tracks on the discs and create your own program. The program can contain up to 20 tracks.
1.Press PROGRAM/MEMO on the remote control on the stop mode.
2.Press . bb/BB > to select the track. EX) “04
Program number
Track number
3.Press PROGRAM/MEMO on the remote control.
4.Repeat 1~3.
5.Press PLAY (B) on the front panel or PLAY/
PAUSE (B/[]) on the remote control. “PROG.” appears in the display window.
To check program contents
Press PROGRAM/MEMO on the remote control on the stop mode.
- A Track and program number will be displayed.
To clear program contents
Press PROGRAM/MEMO on the remote control on the stop mode. And then press CD STOP(x) on the remote control.
To add program contents
1.Press PROGRAM/MEMO on the remote control repeatedly on the program stop mode until Track Number blinks.
2.Repeat 2~4 on above.
To modify program contents
1.Press PROGRAM/MEMO on the remote control to display program number you want to modify.
2.Repeat 2~4 on above.
title
title
title Operation Operation
title
13
