18ASSEMBLING AND PREPARING

Mounting on a table

Securing the TV to a wall (optional)

 

1Lift and tilt the TV into its upright position on a table.

-Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation.

 

10 cm (4 inches)

 

10 cm

10

cm

 

 

 

 

10 cm

2Connect the power cord to a wall outlet.

CAUTION

 

yyDo not place the TV near or on sources of heat,

ENGLISH

as this may result in fire or other damage.

 

 

Adjusting the angle of the TV to suit view

Swivel 15 degrees to the left or right and adjust the angle of the TV to suit your view.

15˚

15˚

NOTE

yyWhen adjusting the angle of the TV, watch out for your fingers.

yyPersonal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury.

1Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.

- If there are bolts inserted at the eye-bolts position, remove the bolts first.

2Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye- bolts on the rear of the TV.

3Connect the eye-bolts and wall brackets tightly with a sturdy rope.

Make sure to keep the rope horizontal with the flat surface.

CAUTION

yyMake sure that children do not climb on or hang on the TV.

NOTE

yyUse a platform or cabinet that is strong and large enough to support the TV securely.

yyBrackets, bolts and ropes are optional. You can obtain additional accessories from your local dealer.

Page 18
Image 18
LG Electronics 55GA7900, LG 42GA6400, 50GA6400, 47GA7900, 47GA6400, 55GA6400, 60GA6400, GA6450 Mounting on a table, English