Installation and Setup
Setting up the unit | Component Video (ColorStream®) connection | |||||
|
|
|
|
| Connect the COMPONENT VIDEO OUT jacks on | |
The picture and sound of a nearby TV, VCR, or radio | the unit to the corresponding jacks on the TV | |||||
may be distorted during playback. If this occurs, | using a Y PB PR cable (C). | |||||
position the unit away from the TV, VCR, or radio, or | • If your television is a | |||||
turn off the unit after removing the disc. | ||||||
ready” television, you may take advantage of the | ||||||
|
|
|
|
| ||
The unit Connection |
| unit’s progressive scan output for the highest | ||||
| video resolution. | |||||
Depending on your TV and other equipment there are | • If your TV does not accept your resolution | |||||
setting, abnormal picture appears on the screen. | ||||||
various ways you can connect the unit. Please refer to | ||||||
Please read owner’s manual for TV then set the | ||||||
the manuals of your TV, stereo system or other | ||||||
resolution that your TV can accept. | ||||||
devices as necessary for additional connection | ||||||
| ||||||
information. |
|
| Notes: | |||
|
|
|
| • | You can change the resolution (480i, 480p, 720p, | |
|
|
|
|
| 1080i) for the COMPONENT VIDEO OUT by | |
| R | - AUX - L | OUT |
| pressing RESOL. on the Remote Control. | |
| COAXIAL IN | AUX IN | MONITOR |
|
| |
|
|
|
| |||
|
|
|
| • | For 720p and 1080i resolution, only | |
| Y | COMPONENT VIDEO OUT |
| protected discs can be played back. If the disc is | ||
| PB | PR |
|
| ||
|
|
|
|
| copy protected, it will be displayed at the 480p | |
XM IN | i Pod |
|
|
| resolution. | |
|
|
|
|
| ||
|
|
|
|
| The resolution (720p, 1080i) is for the component | |
|
|
|
|
| and HDMI outputs only. | |
|
|
|
| • The HDMI mode must be set to OFF for Component | ||
|
|
| C | V | video connections. | |
|
|
|
| |||
|
|
|
| • | The resolution (720p, 1080i) does not work with the | |
|
|
|
|
| analog video connections (VIDEO OUT). | |
|
|
|
| L |
| |
| Y |
|
|
|
| |
| COMPONENT VIDEO / | VIDEO |
| |||
| PROGRESSIVE SCAN INPUT | INPUT |
|
Rear of TV
Video Connections to Your TV
Make sure the unit is connected directly to the TV and not to a VCR, otherwise the DVD image could be distorted by the copy protection system.
Connect the MONITOR OUT jack on the unit to the video in jack on the TV using the video cable (V).
Notes:
•For MONITOR OUT jack connection, resolution must be set to 480i or 480p by pressing RESOL. on the Remote Control, however MONITOR OUT is always at 480i standard resolution.
•HDMI mode must be set to OFF for VIDEO OUT jack connection.
Installation and Setup
11