Symptom |
| Cause |
| Correction |
|
|
|
|
|
Radio stations cannot | • | The antenna is positioned or connected | • | Connect the antenna securely. |
be tuned in. |
| poorly. |
|
|
| • | Adjust the antennas and connect an | ||
|
|
| ||
|
|
|
| external antenna if necessary. |
|
|
|
|
|
| • | The signal strength of the stations is too | • | Tune in the station manually. |
|
| weak (when tuning in with automatic |
|
|
|
| tuning). |
|
|
|
|
|
|
|
| • | No stations have been preset or preset | • | Preset the stations (page 32). |
|
| stations have been cleared (when |
|
|
|
| tuning by scanning preset stations). |
|
|
|
|
|
|
|
The Remote Control | • | The Remote Control is not pointed at | • | Point the Remote Control at the remote |
does not work |
| the remote sensor of the unit. |
| sensor of the unit. |
properly. |
|
|
|
|
| • | The Remote Control is too far from the | • | Use the Remote Control within about 20 |
|
| unit. |
| ft (6 m). |
|
|
|
|
|
| • | There is an obstacle in the path of the | • | Remove the obstacle. |
|
| Remote Control and the unit. |
|
|
|
|
|
|
|
| • | The batteries in the Remote Control are | • | Replace the batteries with new ones. |
|
| flat. |
|
|
The front panel | • | Nothing is displayed on the front panel | • | Press DIMMER on the Remote Control. |
display is too dim. |
| display. |
|
|
Maintenance and Service
Refer to the information in this chapter before contacting a service technician.
HANDLING THE UNIT
When shipping the unit
Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection,
Keeping the exterior surfaces clean
•Do not use volatile liquids such as insecticide spray near the unit.
•Do not leave rubber or plastic products in contact with the unit for a long period of time. since they leave marks on the surface.
Cleaning the unit
To clean the unit, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution.
Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit.
Maintaining the Unit
The unit is a
Depending on the operating environment, regular inspection and maintenance are recommended after every 1,000 hours of use.
For details, please contact your nearest authorized service center.
Reference
39