20
Color TFT LCD Module is very sensitive both electrically and physically.Users, therefore,
are requested to follow the “Guidance of handling col or TF T L CD Mo dule” on the followings .
Guidance of handling Color TFT LCD Module
1Be careful not to make scratch
on the polarizer.
- Surface of polarize r is soft and can be
physically damaged easily.
- Please do not touch, push or ru b po larizer
surface with materials over HB hardness.
2Keep clean the surface.
- Please wear rubber glove when touch the
surface of LCD screen.
- Please use soft an d anti-static material
with n-Hexane as cleaner.
3Keep out of water.
- Water on/in the LCD may cause electrical
short or corrosion.
- Please wipe out or dr y water carefully.
4Prevent swift Temperature
& Humidity change.
- Swift temperature and/or humidity change
can make dew or ice which cause
nonconformance such as malfunction.
5
- LCD is not proper to be used at high temp-
erature and high humidity.
- Please keep spe cified temperature and
humidity condition.
6Keep out of Corrosive Gas.
- Corrosive gas effect the polarizer and the circuit
chemically and cause defects accordingly.
7Electrostatic discharge can make damage
- There are electro-static sensitive components such as
CMOS in LCD Module.
- Please earth human body when handle the LCD.In addition,
please do not touch the interface connector pin with bare
hand.
High temperature & high humidity
reduce the life-time.
8Do not operate for a long time under
the same pattern.
- Operating LCD for a long time under the same pattern
can cause image persistence and can damage it.
- Please follow fo l lowing guidance.
1. Turn the power off when do not use.
2. Change the pattern periodically.