B. REMOVING THE OUT CASE(Figure 8)
(1)Remove the vent grille by removing two screws securing it to the out case.
(2)Remove two screws securing it to the front bracket.
(3)Remove two screws securing it to the air duct.
(4)Remove the mounting plate by turning the two screws securing it to the out case.
(5)Remove the base plate by removing six screws securing it to the out case. Remove the Mount, All from the out case by removing two screws securing it to the out case and one screw securing it to the ventilation motor ASS'Y and cavity.
(6)Remove the power cord cover from outcase by removing a screw.
(7)Remove the power cord to the inner of the out case with turning power cord and remove the out case with pushing it back.
Mount, All
Power code
Door
Mounting
Plate
Out Case
Vent Grille
Controller
Figure 8
