K. REMOVING THE TURNTABLE MOTOR
(1)Remove the turntable.
(2)Remove the turntable shaft VERY CAREFULLY with a slotted screwdriver. (Figure 19)
(3)Remove the base plate by removing 6 screws securing it to the oven cavity. (Figure 20)
(4)Disconnect the leadwire from the turntable motor terminals.
(5)Remove the 2 screws securing the turntable motor to the oven cavity ASS'Y. (Figure 21)
NOTES:
•Remove the leadwire from the turntable motor
VERY CAREFULLY.
•Be sure to grasp the connector not the wires when removing.
Figure 19
Figure 20
Wire Leads
Turntable Motor
Figure 21
