LG Electronics LMV1825SBQ, MV1825SW Assembling Door, Removing the Ventilation Motor

H. ASSEMBLING DOOR

(1)When mounting the door assembly to the oven assembly, be sure to adjust the door assembly parallel to the chassis. Also adjust so the door has no play between the inner door surface and oven frame assembly. If the door assembly is not mounted properly, microwaves may leak from the clearance between the door and the oven.

Space

I. REMOVING THE VENTILATION MOTOR

(1)Remove the mounting plate by loosening mounting plate screws (1 or 2 screws) securing it to the back plate. (See Figure 18)

(2)Remove MOUNT ALL loosening one screw loosening one screw securing the ventilation Motor and back plate. (See Figure 19-a)

(1 or 2 screws)

Figure 18

MOUNT, ALL

Figure 19-a

(3)Carefully pull the ventilation motor ASS'Y out of the microwave oven. (See Figure 19-b)

Figure 19-b

J. REPLACING THE HUMIDITY SENSOR

(For sensor model only)

(1)Remove the sensor by removing two screws securing it to the air duct. (See Figure 19-c)

(2)Mount the new humidity sensor to the air duct.

Figure 19-c

7-10