LG Electronics LMVM2075SW, LMVM2075ST Installation Instructions For Glass Tray, Using Oblong Dish

UNDERSTANDING YOUR MICROWAVE OVEN

INSTALLATION INSTRUCTIONS FOR GLASS TRAY

To Install:

1.Place the guide tray on the oven cavity bottom. The rollers on the shaft should fit inside the guide tray bottom groove. (see figure 1, 2-1, 2-2)

2.Place the rotating ring on the guide tray. (see figure 3)

3.Place the glass tray on the rotating ring. Fit the rollers of the shaft between the raised, hollowed groove of the glass tray bottom. The rollers on the rotating ring should fit inside the glass tray bottom ridge. (see figure 4-1, 4-2)

Figure 1	Figure 2-1	Figure 2-2
Figure 3	Figure 4-1	Figure 4-2
(the back of guide tray)

USING OBLONG DISH

When using an oblong dish, don’t forget to place it in the center of the guide tray, or poor performance will result.

An oblong dish which is smaller than 13 inches should be placed on the glass tray. A dish larger than 13 inches should be placed on the raised edge of the guide tray preventing it from touching the glass tray.

Otherwise, poor performance will result. (see figure 6)

Figure 5 Figure 6 Figure 7

9