HOW10 USE
ADJUSTING THE TEMPERATURES AND DISPLAY
Adjust Freezer Temperature | Power Saving Mode |
TO adjust the temperature in the freezer compartment, press the FREEZER button to cycle through the the range of available settings.
n
U°F
Adjust Refrigerator Temperature
To adjust the temperature in the refrigerator compartment, press the REFRIGERATOR button to cycle through the range of available settings.
NOTE: The actual inner temperature varies depending on the food status, since the indicated temperature setting is the target temperature and not the actual temperature within the refrigerator. Initially set the REFRIGERATOR CONTROL at 37 degrees F and the FREEZER CONTROL at 0 degrees F. Leave them at these setting for
24 hours (one day) to stabilize. Then adjust the compartment temperature as illustrated above.
•The display will remain off until the next time the door is opened.
The display will also turn on when any button is pressed, and it will remain on for 20 seconds after the last door opening or button selection.
•To deactivate the
buttons simultaneously and hold them for 5 seconds until the tone sounds.
NOTE: Power Saving Mode function is set on the product.
Caution When Closing the Door
Temperature Display
To change the temperature display from Fahrenheit to Celsius:
•Simultaneously press and hold the FREEZER and REFRIGERATOR buttons for more than
5 seconds.
•Do the same to convert back to Fahrenheit.
&CAUTION
To reduce the risk of door scratches, please make
sure that the refrigerator door mullion is always folded in.
If dew gathers on the refrigerator door mullion at any
point, deactivate the Energy Saving mode until the issue resolves itself.
24
