4. Moving Refrigerator Handle
Remove caps (8) and (9).
Pull cover (5) downward and take it off.
Loosen 3 screws (6) (two on the top and one on the
center), take off handle (7) and attach it on the right.
Attach the cover (5) by pushing it up.
Take off cap (10) and attach it on the right.
Attach the removed caps (8) and (9) on the left side.
7. After Completing the Job
Make sure that the four corners of the door gasket are
not folded over. To ensure a good seal, apply a small
amount of silicon grease on the corner gaskets.
REFRIGERATOR INSTALLATION
Corner
5. Attaching Refrigerator Door
Attach the base grille (1).
Attach the door (3) to the bottom hinge pin.
Attach the middle hinge (4) on the opposite side with the
3 screws (5).
6. Attaching Freezer Door
Place the door (8) onto the middle
hinge pin (7).
Attach the top hinge (10) with 3 screws.
Reinstall top hinge cover (11).
12
Remove screw (2) from left side to right side.
10 6
7
5
6
9
8
75
5
6
8
A-TYPE B-TYPE
A-TYPE
B-TYPE
Remove cap (7) and cap (8).
Loosen the screws (5) (two on the top and two on the
bottom), take off the handle (5), and attach it on the
right.
Attach the removed cap (8) on the left.
Attach cap (7) on the top right side.
11
4
3
5
7
8
7
10
1
2