12
Height adjustment
Makethemlevelbyinsertingflat(
-
type)driverintothegrooveoftheleftheightadjusting
screwandrotatingit clockwise( ).
Makethem level by insertingflat (
-
type)driver intothe groove of the right height
adjustingscrewand rotating it clockwise(
Adjustthe level whenthe refrigerator dooris lower than the freezer doorduring the
useof the refrigerator.
1.Using the wide side of the tool for adjustment , turn the keeper nut
Keeper nut
Adjustment
hinge pin
Tool for
adjustment
Up
Down
Installation
CAUTION
).
The refrigeratordoorwillclose smoothlyby raisingthe front sideby adjustingthe
heightadjusting screw. Ifthedoor doesnot closeproperly becauseit is improperly
adjusted, the performanceofthe refrigerator will be affected.
If the freezer
compartment door
is lower than the
refrigerator
compartment door
If the freezer
compartment door
is higher than the
refrigerator
compartment door
-Type 1
After leveling the
door height
Donot forcetoo hard tolevel the height.The hinge pincan bepulled out.
(Adjustablerangeof heightis a maximumof 2" (5cm ).
( )
clockwise to loosenthe keeper nut.
2.Using the narrow side of the tool for adjustment, turn the adjustment hinge pin
( )clockwise or ( ) counterclockwisetolevel the refrigeratorand
freezer door.
3.After setting the level of the door, turn the keeper nut( ) counterclockwise to
tighten.
If the freezer
compartment door
is higher than the
refrigerator
compartment door
-Type 2
(First identify your adjusting screw type, it could vary)