Owner’s Manual 17
AUTO RESTART
When power is restored after an electrical power failure, the unit will begin to run at its last setting.
When the air conditioner has been performed its cooling operation and is turned off or set to the fan
position,wait at least 3 minutes before resetting to the cooling operation again.

4. FAN SPEED SELECTOR

Everytime you push this button, it is set as follows. (Hi[ ]
ENGLISH
21Hours 22Hours 23Hours 24Hours
Low[ ] Hi[ ]....)

5. ROOM TEMPERATURE SETTING BUTTON

This button can automatically control the temperature of the room. The temperature can be set within a
range of 60°F to 86°F by 1°F.

6. ENERGY SAVER

The fan stops when the compressor stops cooling.
Approximately every 3 munutes the fan will turn on and check the room air to determine if cooling is needed.

7. REMOCON SIGNAL RECEIVER

A slight heat odor may come from the unit when first switching to HEAT after the cooling
season is over.This odor, caused by fine dust particles on the heater, will disappear quickly.
Operating Instructions
y
battery
battery
battery.
battery
battery
one
ENGLISH