APPENDIX
Command Reference List
|
| COMMAND1 | COMMAND2 | DATA |
| COMMAND1 | COMMAND2 | DATA | ||||
|
| (Hexadecimal) |
| (Hexadecimal) | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 00 ~ 01 |
|
|
|
|
|
|
01. | Power |
| k | a |
|
| 14. | Colour Temperature | k | u | Refer to p.67 | |
02. Aspect Ratio |
| k | c | Refer to p.66 | 15. | Red Adjustment | k | v | 00 ~ 3C | |||
03. Screen Mute |
| k | d |
| 00 ~ 01 |
| 16. | Green Adjustment | k | w | 00 ~ 3C | |
04. Volume Mute |
| k | e |
| 00 ~ 01 |
| 17. | Blue Adjustment | k | $ | 00 ~ 3C | |
05. Volume Control |
| k | f |
| 00 ~ 64 |
| 18. | Abnormal Status | k | z | FF | |
06. Contrast |
| k | g |
| 00 ~ 64 |
| 19. | Auto Configure | j | u | 01 | |
07. | Brightness |
| k | h |
| 00 ~ 64 |
| 20. Equalize | j | v | Refer to p.68 | |
08. Colour |
| k | i |
| 00 ~ 64 |
| 21. | Tune Command | m | a | Refer to p.68 | |
09. Tint |
| k | j |
| 00 ~ 64 |
| 22. Channel Skip | m | b | 00 ~ 01 | ||
10. | Sharpness |
| k | k |
| 00 ~ 64 |
| 23. Key | m | c | Key Code | |
11. | OSD Select |
| k | l |
| 00 ~ 01 |
| 24. | Input select (Main) | x | b | Refer to p.68 |
12. | Remote Control Lock |
| k | m |
| 00 ~ 01 |
|
|
|
|
|
|
| /Key Lock Mode |
|
|
|
|
|
|
|
|
|
|
|
13. | Balance |
| k | t |
| 00 ~ 64 |
|
|
|
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : First command to control the set.(j,k,m or x)
[Command 2] : Second command to control the set.
[Set ID] : You can adjust the set ID to choose desired Set ID number in Setup menu. Adjustment range is 1~ 99. When selecting Set ID ‘0’, every connected set is controlled. Set ID is indicated as decimal (1~ 99) on menu and as Hexa decimal (0x0~ 0x63) on transmission/receiving protocol.
[DATA] : To transmit command data.
Transmit ‘FF’ data to read status of comand.
[Cr] : Carriage Return
ASCII code ‘0x0D’
[ ] : ASCII code ‘space (0x20)’
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
The set transmits ACK (acknowledgement) based on this for- mat when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
Set transmits ACK(acknowledgement) based on this format when receiving abnormal data form
[Command 2] : use as command.
[Set ID]: use the small character, if set ID is 10, set will send the ‘0’, ‘a’
[Data]: use the small character, if data is 0xab, set will send the ‘a’, ‘b’.
[NG]: use the large character.
65
