LG Electronics M4210C manual RS-232CControlling the Multiple Product

RS-232CControlling the Multiple Product

Use this method to connect several products to a single PC.

You can control several products at a time by connecting them to a single PC.

Connecting the cable

Connect the RS-232C cable as shown in the picture.

*The RS-232C protocol is used for communication between the PC and product. You can turn the product on/off, select an input source or adjust the OSD menu from your PC.

RS-232C

(CONTROL &

SERVICE)

RS-232C Cable (not included)

PC

monitor 1 monitor 2 monitor 3 monitor 4

Communication Parameter

▲ ▲ ▲ ▲ ▲ ▲

Baud Rate : 9600bps (UART)

Data Length : 8bits

Parity Bit : None

Stop Bit : 1bit

Flow Control : None

Communication Code : ASCII code

A1