CONNECTING ELECTRIC DRYERS

wWARNING: To help prevent fire, electric shock, serious injury, or death, the wiring and grounding must conform to the latest edition of the National Electrical Code, ANSI/NFPA 70 and all applicable local regulations. Please contact a qualified electrician to check your home’s wiring and fuses to ensure that your home has adequate electrical power to operate the dryer.

Electrical Requirements for Electric Models Only

wWARNING: To reduce the risk of fire, electric shock, or personal injury when using this appliance, follow basic precautions, including the following:

•This dryer must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must

be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the dryer. Failure to do so can result in fire, explosion, or death.

•The dryer has its own terminal block that must be connected to a separate 240 VAC, 60 Hertz, single-phase circuit, fused at 30 amperes (the circuit must be fused on both sides of the line). ELECTRICAL SERVICE FOR THE DRYER SHOULD BE OF THE MAXIMUM RATE VOLTAGE LISTED ON THE

NAMEPLATE. DO NOT CONNECT DRYER TO 110-, 115-, OR 120-VOLT CIRCUIT. Heating elements are available for field installation in dryers which are to be connected to an electrical service of a different voltage than that listed on the rating plate. Failure to follow these instructions can result in fire, explosion, or death.

•If branch circuit to dryer is 15 ft. (4.5 m) or less in length, use UL (Underwriters Laboratories) listed No. 10 AWG wire (copper wire only), or as required by local codes. If over 15 ft. (4.50 m), use UL-listed No.-8 AWG wire (copper wire only), or as required by local codes. Allow sufficient slack in wiring so dryer can be moved from its normal location when necessary. Failure to do so can result in fire, explosion, or death.

•The power cord (pigtail) connection between wall receptacle and dryer terminal block

IS NOT supplied with dryer. Type of pigtail and gauge of wire must conform to local codes and with instructions on the following pages. Failure to follow these instructions can result in fire, explosion, or death.

•A 4-wire connection is required for all mobile and manufactured home installations, as well as all new construction after January 1, 1996. A 4-wire connection must be used where local codes do not permit grounding through the neutral wire. Failure to do so can result in fire, explosion, or death.

wWARNING: To reduce the risk of fire, electric shock, or personal injury when using this appliance, follow basic precautions, including the following:

•Do not modify the plug and internal wire provided with the dryer.

•The dryer should be connected to a 4-hole outlet.

•If it does not fit the outlet, a proper outlet will need to be installed by a qualified electrician.

Special Electrical Requirements for Mobile or Manufactured Homes

wWARNING: To reduce the risk of fire, electric shock, or personal injury when using this appliance, follow basic precautions, including the following:

•Any installation in a manufactured or mobile home must comply with the Manufactured Home Construction and Safety Standards Title 24 CFR, Part 32-80 or Standard CAN/ CSA0Z240 MH and local codes and ordinances.

•A 4-wire connection is required for all mobile and manufactured home installations, as well as all new construction after January 1, 1996. Failure to do so can result in fire, explosion,

or death.

18

Page 17 Page 19
Page 18
Image 18
LG Electronics MFL62512805 owner manual Connecting Electric Dryers, Electrical Requirements for Electric Models Only
Page 17 Page 19

MFL62512805 specifications

LG Electronics MFL62512805 is a highly versatile and efficient component that caters to various needs in modern appliances, particularly in LG's lineup of washing machines. This part is notable for its reliability and advanced features, which enhance the performance of the appliances it is integrated into.

One of the key features of the MFL62512805 is its robust design, ensuring durability and long-lasting performance. Made from high-quality materials, it can withstand the rigors of daily use, making it an ideal choice for both domestic and industrial applications. This component contributes significantly to the overall efficiency of washing machines, allowing them to execute cycles more effectively and reduce water consumption.

The MFL62512805 is equipped with innovative technologies that optimize appliance functionality. Among its standout characteristics is the integration of smart technology, which allows for seamless connectivity and control via smartphones. This feature enables users to monitor and manage their washing machines remotely, providing convenience and real-time updates on cycles and performance.

In terms of energy efficiency, the MFL62512805 plays an essential role in helping LG appliances meet energy-saving standards. It is designed to minimize electricity consumption while maintaining high washing performance, contributing to lower utility bills and a reduced carbon footprint.

Moreover, this component supports various washing modes and programs, adaptively adjusting to different fabric types and soiling levels. The ability to customize wash cycles ensures that users receive optimal cleaning results for their laundry while protecting delicate garments.

The installation and replacement of the MFL62512805 are straightforward, making it accessible for users who may want to engage in DIY repairs. LG has also provided extensive resources and customer support to assist users in maintaining their appliances efficiently.

In conclusion, the LG Electronics MFL62512805 is a testament to the brand's commitment to quality and innovation. With its durability, energy efficiency, advanced technologies, and user-friendly features, it plays a pivotal role in enhancing the overall performance of LG washing machines, ensuring they meet the diverse needs of consumers in an ever-evolving market.
Top Page Image Contents