LG Electronics MFL67202801(1.0)H Installing the Battery and microSD Card, Installing the battery

16The Basics

Installing the Battery and microSD Card

NOTE It is important to fully charge the battery before initial use of the phone.

Installing the battery

The phone comes with a rechargeable battery. Keep the battery charged while not in use in order to maximize talk, use, and standby time. The battery charge level is shown at the top right corner of the screen.

1 Hold the phone with	2 Align the battery	3 Replace the battery
both hands, with the	contacts with	cover over the back
microphone facing	the terminals	of the phone (as
upward. Then use	at the bottom	demonstrated).
the fingertip cutout	of the battery	Apply a steady
to pull open the back	compartment, then	downward pressure
cover (as shown	press the battery	until the back cover
above).	into place.	clicks into place.

Removing the battery

Turn the power off. Remove the battery cover (as demonstrated in the previous instructions). Then flip the phone to its normal position and use the fingertip cutout at the top left corner of the battery compartment to lift the battery out.

Inserting a microSD card

Turn the power off. Remove the battery cover and the battery (as demonstrated in the previous instructions). Locate the microSD card slot (microSD is inscribed near the slot opening). Position the microSD card with the label side facing up and slide it into place until it is fully inserted and locked in place.