2 Plasma Monitor
Safety Instructions
Safety InstructionsSafety Instructions
1. Do not place the product in direct sunlight or near
heat sources such as heat registers, stove and so on.
This may cause a fire.
2. Do not use the product in damp place such as a
bathroom or any place where it is likely to get wet.
This may cause a fire or could give an electric shock.
3. Bend antenna cable between inside and outside
building to prevent rain from flowing in.
This may cause water damaged inside the product and could
give an electric shock.
4. Earth wire should be connected.
- If the earth wire is not connected, there is possible a danger
of electric shock caused by the current leakage.
- If grounding methods are not possible, a separate circuit
breaker should be employed and installed by a qualified
electrician.
- Do not connect ground to telephone wires, lightning rods or
gas pipe.
5. Do not placing anything containing liquid on top
of the product.
This may cause a fire or could give an electric shock.
6. Wet Location Marking :
Apparatus shall not be exposed to dripping or splashing and
no objects filled with liquids, such as vases, shall be placed
on the apparatus.
7. Do not insert any object into the exhaust vent.
This may cause a fire or could give an electric shock.
8. Do not place heavy objects on the product.
This may cause serious injury to a child or adult.
9. Do not use water the product while cleaning.
This may cause damaged the product or could give an elec-
tric shock.
10. In case of smoke or strange smell from the prod-
uct, switch it off ,unplug it from the wall outlet
and contact your dealer or service center.
This may cause a fire or could give an electric shock.
11. Do not attempt to service the product yourself.
Contact your dealer or service center.
This may cause damaged the product or could give an elec-
tric shock.
12. During a lightning thunder, unplug the product
from the wall outlet and don’t touch an antenna
cable.
This may cause damaged the product or could give an elec-
tric shock.
W

WARNING

*Safety instructions have two kinds of information, and each meaning of it is as below.
Take care of danger that may happen under specific condition.
The violation of this instruction may cause serious injuries and even death.
The violation of this instruction may cause light injuries or damage of the
product.
WARNING
NOTES
Power
supplier
Short-circuit
breaker