Configuration Options via Command Line (Cont.)
(Continued from previous page)
If applicable, you can also press Enter at each prompt to accept the default value in square brackets.
Enter new year [2014]>
Enter new month [01]>
Enter new day [08]>
4.At each of the following prompts, type the hour and minute, respectively. Note that the hour should be entered in
If applicable, you can also press Enter at each prompt to accept the default value in square brackets.
Enter new hour [18]> Enter new minute [49]>
5.The system will display the new time and then prompt for confirmation, for example:
New time:
Either, type y and press Enter to apply the new configuration to the system, or type n and press Enter to return to the Setup Command > prompt without changing the time
configuration.
If you do apply new manual configuration, the system will display confirmation, for example:
New time is set
Change the Login Password
For security purposes, it is recommended that the admin user login password be unique to the system. Note that the login password is
1.At the Setup Command > prompt, type pwd and press Enter. The system prompts for the current admin user password:
Changing password for admin Old password:
2.Type the current password and press Enter. The system will then prompt you to type and retype the new password:
New password: Retype password:
3.Type and then retype the new password at the prompts. Press Enter after each entry.
Once you complete the Password fields successfully, the system displays confirmation:
Password for admin changed by admin.
62 |