Configuration Options via Command Line (Cont.)
Reset the System
Note: This option is also available from the Setup Menu.
1.If not already logged in, log in to the OAT100R as described on page 39.
2.At the Main Menu Command > prompt, type reset and press Enter. The system will prompt for confirmation:
Are you sure you want to reset the system? [y/n]:
3.Either:
•Type y and press Enter to initiate an immediate reset of the OAT100R. The reset process, during which each of the tuners will also be reinitialized, may take up to two minutes, after which the system resumes normal operation.
•Type n and press Enter to return to the Command prompt without resetting the system.
Exit the Current Session
At the Main Menu Command > prompt, type exit and press Enter to end the current session.
67 |