Shutdown
1.Press POWER and a warning message will appear. To turn off the projector, press POWER again.
POWER | SOURCE |
AUTO | BLANK |
POWER
SOURCEMENU
2.To cool down the projector, the fan will continue to run for approximately 90 seconds, during which the LED will flash.
*After the projector is turned off, there is a
3.Disconnect the power cord from the wall socket.
(110V)(220V)
Caution
•Please do not unplug the power cord before POWER is shut down or during the
•If the projector is not properly shut down, to protect the lamp, the sys- tem will detect this and cool the lamp for 90 seconds automatically before turning on again.
DLP Personal Projector
19 |
