LG Electronics RD-JT91 owner manual Focus and Position of the Screen Image, Selecting source mode

Installing and Composition

Focus and Position of the Screen Image

When an image appears on the screen, check if it is in focus and fits well to the screen.

Zoom ring

Focus ring

●To adjust the focus of the image, rotate the focus ring which is the outer ring on the lens.

●To adjust the size of the image, rotate the zoom ring which is the inner ring on the lens.

To raise or lower the image on the screen, extend or retract the foot at the bottom of the projector by pushing foot adjuster button as below.

1.While pressing the foot adjuster button, raise or lower the projector to place the screen image in the proper position.

2.Release the button to lock the foot in its new position.

3.To fine-tune the height of the projector, rotate the front foot to raise or lower it. After raising the front foot, do not press down on the projector.

Selecting source mode

1. Press the SOURCE button.

	select	OK
F	RGB	G

2. Each press of the F, G button changes the display as below.

RGB

DVI

S-Video

Video

16