Connection
Connection
Connecting to a Desktop PC
*You can connect the projector to a computer of VGA, SVGA, XGA and SXGA output.
*You can use ARC function for the RGB signals of the Aspect Ration 4:3. (For HD wide input signals, you cannot use ARC function.)
*Fundamentally, HD wide input signal is not included in the Spec, so the set may not support HD signal perfectly.
*Refer to page 25 for the supported pc graphic card displays of the projector.
< How to connect >
a. Connect computer cable to RGB Input (PC/DTV) of the projector.
b. If the PC has DVI output, connect DVI cable to DVI Input of the projector.
c. Connect the audio cable of PC (LINE OUT sound port) to Audio of the projector.
* If the PC has two audio out ports of SPEAKER OUT and LINE OUT, connect the LINE OUT port to get better sound quality.
Connecting to a Notebook PC
< How to connect >
a. Connect computer cable to RGB Input (PC/DTV) of the projector.
* If you set your computer, such as a notebook type IBM PC/AT compatible, to output the signal to both the display of your computer and the external monitor, the picture of the external monitor may not appear properly. In such cases, set the output mode of your computer to output the signal only to the external monitor. For details, refer to the operating instructions supplied with your computer.
b. If the PC has DVI output, connect DVI cable to DVI Input of the projector.
c. Connect the audio cable of PC (LINE OUT sound port) to Audio input of the projector.
17
