4
Troubleshooting
26Troubleshooting
Troubleshooting
PROBLEM | CAUSE & CORRECTION | |
|
| |
| yy The power cord is unpluged. | |
No Power | Plug in the power cord. | |
yy Check the condition by operating other electronic devices. | ||
| ||
|
| |
| yy Incorrect input source is selected. | |
No sound | Check the input source and select the correct input source. | |
yy The mute function is activated. | ||
| ||
| Press MUTE@or adjust the volume level to cancel the mute function. | |
|
| |
No display | yy The LCD OFF function is activated. | |
Press SLEEP to cancel the function. | ||
| ||
|
| |
| yy The remote control is too far from the unit. | |
| Operate the remote control within about 23 ft (7m). | |
The remote control | yy There is an obstacle in the path of the remote control and the unit. | |
does not work | ||
Remove the obstacle. | ||
properly. | ||
yy The batteries in the remote control is exhausted. | ||
| ||
| Replace the batteries with new one. | |
|
| |
The AUTO POWER | yy Check the state of SIMPLINK and turn off SIMPLINK. | |
yy Depending on the connected device by the optical cable, this function may not | ||
function does not | ||
work. | operate. | |
|
| |
| Check the details below and adjust the unit according to them. | |
| yy Switch [ON] state of DRC function to [OFF] by using remote controller. | |
When you sense that | yy With the sound bar connected with TV, change the AUDIO DIGITAL OUT setting | |
outputted sound of | on TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM]. | |
yy With the sound bar connected with Player, change the AUDIO DIGITAL OUT | ||
the unit is low. | ||
setting on Player Setup Menu from [PCM] to [PRIMARY | ||
| ||
| [BITSTREAM]. | |
| yy Change Audio DRC setting on Player setup menu to [OFF] state. | |
|
|
