USB Configuration
The USB Download Menu provides options that enable you to download individual configuration or software files to the STB.
Each of the USB Download Menu functions requires that you have the appropriate file(s) loaded on a USB memory device. If you wish to perform a software upgrade from the USB Download Menu, the software upgrade file(s) must be stored in a folder named “LG_DTV” in the root directory of the USB device. TLX/TLL files for cloning or FTG Configuration (.tlx) files should simply be stored in the root directory of the USB device.
The procedure below assumes that the desired file(s) is/are already loaded onto the USB device. For further information on USB Download Menu functions and file requirements, and/or for information on creating configuration files, refer to the appropriate section(s) in this document.
Before You Begin
•Ensure the USB device to be used has been formatted with FAT format.
•If you intend to use the Zoning feature(s) on this STB, make sure to assign the appropriate TV Zone # and/or
BEFORE continuing with USB Configuration. See “TV Configuration Options” on page 17 for further information.
•Refer to “Custom Master STB Setup” on pages 35 to 38 for information on creating a TLX or TLL file for cloning purposes, and/or refer to “Creating an FTG Configuration File” on pages 45 to 46 for information on creating an FTG Configuration (.tlx) file for FTG Mode configuration.
•See Reference section, “Upgrading STB Software using a USB Memory Device,” for further information on software upgrades.
USB Configuration via
With either the TV Configuration Options or the Zones, Label, and Room Number screen on display, proceed as follows to configure the STB/display using the USB memory device.
1.Insert the USB memory device that contains the appropriate file(s) into either of the STB’s USB ports.
2.Use the arrow keys on the Installer Remote to select USB Configuration, and then press OK.
You will be redirected to the STB’s USB Download Menu (see example at right).
3.Select the appropriate option from the USB Download Menu, and complete the download as required.
Note: If you perform a software upgrade, the STB will complete the upgrade and then reboot. Upon restart, the
4.Remove the USB memory device, and verify that the appropriate configuration is resident on the STB.
USB Download Menu
Upgrade STB Software
Upgrade PTC Software
Diagnostics
Teach To STB (TLL)
Teach To STB (TLX)
Previous | OK |
Note: You can press 
on the Installer Remote at any time to return to the
22 |